CYZII立式雨水泵、循环泵

[日期:2019-09-02]

 

Content

CYZ型长轴泵

CYZ Type Long Spindle Pump

CYZ型长轴泵安装尺寸图

Installation Dimension Figure of CYZ Type Long Spindle Pump

 

产品概况

CYZ型系列立式长轴泵具有效率高、汽蚀性能好、立式安装、结构紧凑、工作平稳、操作简单、维修方便、占地面积小,能够实现自动控制等特点。

适合抽送清水或停驶较小颗粒的污水,也可抽送腐蚀性液体,广泛用于电力、石化、冶金、水利、市政等。

Product Introduction

CYZ vertical 1ong shaft pump, vertial installed, and possessing those advantages such as high efficiency, excellent cavaitations performance, compact structure, small floor area, automatic control, is simple to operate and convenient to be fixed.

Fitful to transfer clean water, sewage containing small particles, or corrosive liquid it is widely applied in electricity, petrochemical industry, metallurgy,water conservancy and city planning, etc.

工作条件

◆流量为28~3400m3/h,扬程为12~130m;

◆输送介质温度为:T≤75℃;

◆伸入长度≤19m。

Working condition

◆Capacity:28~3400 m3/h,head:12~130m;

◆Temperature of the transferred medium:T≤75℃;

◆Extension length≤1 9m。

结构特点

CYZ型系列泵均为立式结构,设计合理,结构紧凑,开启方便,便于维修。叶轮浸没在介质中,泵轴和内、外管分为多节,中间采用联轴螺母,伸入长度可根据用户的要求合理选择。

机组安装方式为电机、泵体直接安装在同一个基础上;

泵的吸收池为湿坑式,即泵直接插入开敞的吸水池中;

泵的中间轴承采用进口非金属导轴承结构,其润滑万式为节流自润滑或外引清洁水润滑该进口导轴承结构可靠,使用寿命较长,振动小,轴封为软填料密封,处于国内领先水平。

泵从进口方向看,为逆时针方向旋转。

Structure character

    The structure is vertical type, and because of the well design and the compact structure, the pump is convenient to star and to be fixed. The impeller is submerged under the medium, and the pump shaft as well as both the inside and the outside pipe is divided as many units which are jointed by the nuts, so you may select the rational extension lengtrl according to your demand.

    The motor and the pump are fixed on the same base.

The pump is straightly submerged under the suction pool.

The intermediate beating whose structure is reliable,is non-ferrous guiding bearing self-lubricating or lubricated by the clean water from outside and sealed by the wad.

Observed from the suction,the impeller rotates widdershins.

材质

根据所输送介质对泵腐蚀情况,用户可选用相适应的材质,泵与介质接触的主要过流部件材质如下;

MateriaI

According to the corrosion to the pump,the client may select relative material as followed list in the table;

代号

Code

零件名称

Unit

C01

C02

C03

C04

备注

Note

过流部件Hydranlic Parts

HT250

ZG1Cr18Ni9Ti

316

1Cr18Ni12Mo2Ti

特殊要求合同注明Special demand should be noted on the contract

输液管Supply Pipe

A3

1Cr18Ni9

1Cr18Ni12Mo2Ti

1Cr18Ni12Mo2Ti

轴Shaft

2Cr13

1Cr18Ni9

 

1Cr18Ni12Mo2Ti

1Cr18Ni12Mo2Ti

中间轴承Intermediate Bearing

耐磨橡胶XL(进口) Wear-resistant rubber/X(imported)

耐磨橡胶XL(进口) Wear-resistant rubber/X(imported)

耐磨橡胶XL(进口) Wear-resistant rubber/X(imported)

耐磨橡胶XL(进口) Wear-resistant rubber/X(imported)

Ⅰ型泵采用

TypeⅠ

中间轴承Intermediate Bearing

SKF(金属轴承)

SKF(Metal bearing)

SKF(金属轴承)

SKF(Metal bearing)

SKF(金属轴承)

SKF(Metal bearing)

SKF(金属轴承)

SKF(Metal bearing)

Ⅱ型泵采用

TypeⅡ

 

型号说明Code

 

产品概述

    CYZ型立式长轴泵为立式离心泵,按叶轮型式可分为单级和多级型式。该系列泵具有效率高、汽蚀性能好等特点。立式安装、结构紧凑、工作平稳、操作简单、维修方便、占地面积小、可与CKK控制柜配合使用实现自动控制。

    适合抽送清水或含较小颗粒的污水,也可抽取腐蚀性介质,广泛应用于核电、火电、水电、石化、冶金、市政、水利等行业。

工作条件

    流量为28~3400m3/h,扬程为12~130m;

    输送介质温度:T≤75℃;

    伸入长度≤30m。

结构简介

    CYZ型立式长轴泵均为立式结构,设计合理,结构紧凑,开启方便,便于维修。

    叶轮浸没在介质中,泵轴和内外管分为多级,轴与轴之间采用键销联接,套筒联轴器加渗氮处理,不会产生生锈现象,结合面积更大,拆卸更方便,对于泥沙含量大的介质可采用中间护轴管结构,防泥沙、防干磨,深入长度可根据用户实际需求进行合理调整;

    机组安装方式为电机、泵体直接安装在同一个基础上;

    立式安装占地面积较小,比地下式泵房节省基建、管道等费用;

    泵池为湿坑式,即泵直接插入开敞式的吸水池中(泵座需固定);

    泵中间轴承采用进口XL非金属导轴承结构,润滑方式为节流自润滑或外引清洁水润滑,该导轴承结构可靠,振动小,使用寿命较长。轴封采用软填料密封,处于国内领先水平;

    泵从进口方向看为逆时针方向旋转,叶轮、泵体采用国内先进水力模型,电机采用低转速电机,确保泵的稳定运行。

材质情况

代号

零件名称

C01

C02

C03

C04

备注

过流部件

HT250

ZG1Cr18Ni9Ti

316

1Cr18Ni12Mo2Ti

特殊要求

合同注明

输液管

A3

1Cr18Ni9

1Cr18Ni12Mo2Ti

1Cr18Ni12Mo2Ti

2Cr13

1Cr18Ni9

1Cr18Ni12Mo2Ti

1Cr18Ni12Mo2Ti

中间轴承

耐磨橡胶XL(进口)

耐磨橡胶XL(进口)

耐磨橡胶XL(进口)

耐磨橡胶XL(进口)

Ⅰ型泵

中间轴承

SKF(金属轴承)

SKF(金属轴承)

SKF(金属轴承)

SKF(金属轴承)

Ⅱ型泵

型号说明

 

 

 

Product Introduction

    CYZ Vertical Axis Pumps are vertical centrifugal pumps, with single-stage impeller or multi-stage impeller. The pumps are efficient and with good cavitation performance. The pumps are vertical, well designed, compact, balanced, small floor coverage, easy to operate and maintain. And we can used the pumps with our CKK control system.

    The CYZ pumps can transport clean water, sewage water with small particles, corrosive mediums. The pumps are widely used in nuclear power, thermal power, hydropower, petrochemical, metals & mining, municipal, water conservation etc.

Working Condition

    Q:28~3400m3/h, H:12~130m;

    Medium temperatureT≤75℃

    length of down comerL≤30m.

Structure Description

    The CYZ pumps are vertical, well designed, compact, balanced, small floor coverage, easy to operate and maintain.

    The impeller is immersed in the medium, the shafts and pipes are divided into several parts, the shafts are connected with keys and covered with box coupling nitrided. They are unable to rust.

   

   

   

   

   

 

Material Information

Code

Unit

C01

C02

C03

C04

Note

Flow Components

HT250

ZG1Cr18Ni9Ti

316

1Cr18Ni12Mo2Ti

Special demands

marked in

the contract

Supply Pipe

A3

1Cr18Ni9

1Cr18Ni12Mo2Ti

1Cr18Ni12Mo2Ti

Shaft

2Cr13

1Cr18Ni9

1Cr18Ni12Mo2Ti

1Cr18Ni12Mo2Ti

Intermediate

Bearing

Abrasive rubber

XL(imported)

Abrasive rubber

XL(imported)

Abrasive rubber

XL(imported)

Abrasive rubber

XL(imported)

TypeⅠ

Intermediate

Bearing

SKF

(Metal bearing)

SKF

(Metal bearing)

SKF

(Metal bearing)

SKF

(Metal bearing)

TypeⅡ

Code Information

 

 

 

阅读: